GLR-100 5.12kWh Rack LFP Battery product image

Battery Modules & PacksModel and configuration evidence review5.12 kWh

GLR-100 51.2V 100Ah Rack LFP Battery for System RFQs

Current source identity: GLR-100 exact model; displayed values are source-derived, while document editions and current order configuration remain to be supplied.

The GLR-100 record identifies a 51.2 V, 100 Ah LFP battery with 5.12 kWh nominal energy, a 44.8–57.6 V range and 50 A recommended charge/discharge current. It also lists rack, wall or stand mounting, RS485/RS232/CAN, Wi-Fi/Bluetooth and a cycle-life statement above 6,000 cycles at 0.5C, 25°C and 90% DoD. Usable energy, maximum current, supported parallel quantity, exact inverter protocol/firmware and released transport/certificate documents still require confirmation.

Model: GLR-100
Nominal rating: 51.2 V / 100 Ah / 5.12 kWh
Recommended current: 50 A charge / 50 A discharge
Communication: RS485 / RS232 / CAN; Wi-Fi / Bluetooth listed

Request Quote Request Confirmed Datasheet

Current source-derived specifications

These values are preserved from the current product record. Read them with the configuration, compatibility, document and project boundaries below before using them in a quotation.

Battery & Energy

Battery Format	Rack / wall / stand-mount low-voltage LFP battery
Nominal Voltage	51.2 V
Nominal Capacity	100 Ah
Nominal Energy	5.12 kWh
Voltage Range	44.8–57.6 V
Recommended Current	50 A recommended charge and discharge
Cycle Life	>6,000 cycles at 0.5C, 25°C, 90% DoD
Recommended Charge Current	50 A
Recommended Discharge Current	50 A

System & Installation

Operating Temperature	Charge 0–55°C; discharge -10–60°C
Communication	RS485 / RS232 / CAN; Wi-Fi and Bluetooth listed
Installation	Rack-mounted, wall-mounted or stand-mounted
Scalability	Confirm final parallel quantity and BMS protocol
Dimensions	440 × 440 × 133 mm
Weight	48 kg
Model Number	GLR-100
Storage Temperature	-10 to 40°C
Wireless Communication	Wi-Fi / Bluetooth
Compatible Inverters Listed	Growatt, Solis, GoodWe, Sol-Ark, SRNE, Deye
Design Lifespan	15 years

Current document status

Request the current GLR-100 datasheet/manual, BMS protocol and compatible-inverter matrix, parallel wiring/protection instructions, certificate copies, UN38.3 test summary, SDS, packing specification and warranty terms. Labels in a source table are not substitutes for released files.

Current GLR-100 evidence

Distinguish nominal battery data from system compatibility and warranted service

The model identity is clear, but the final inverter pair, bank architecture and document set are configuration-specific.

Nominal electrical identity

The record states 51.2 V, 100 Ah, 5.12 kWh nominal energy and a 44.8–57.6 V range. Usable energy and maximum continuous/peak current are not stated.

Recommended current

50 A charge and discharge are listed as recommended values. Confirm BMS limits, time/temperature derating, fuse/breaker, cable size and inverter power expectations.

Cycle statement

More than 6,000 cycles is scoped to 0.5C, 25°C and 90% DoD in the record. Confirm end-of-life threshold, test standard and how the result relates to warranty.

Physical and communication

440 × 440 × 133 mm, 48 kg, three mounting descriptions and RS485/RS232/CAN are listed. Connector, protocol, addressing, rack hardware and clearances need the manual.

GLR-100 RFQ checks

Six checks before pairing or paralleling the battery

The exact inverter, duty, bank layout and installation environment must be known before order release.

Inverter pairing

Provide inverter brand, full model/suffix, firmware, battery voltage/current limits and required CAN/RS485 protocol; obtain written compatibility evidence.

Power and energy duty

Define continuous/peak battery power, daily throughput, usable-energy target, reserve SOC, autonomy, charge source and expected cycling frequency.

Parallel architecture

Confirm supported quantity, identical-age rule, master/slave addressing, busbars, equal cable lengths, protection per module, isolation and commissioning sequence.

Mounting and environment

Choose rack, wall or stand arrangement and verify structural loading, fixing hardware, indoor enclosure/IP, temperature, ventilation, access and separation requirements.

Safety and transport

Request exact-model UN38.3 test summary, SDS, classification, marks/labels, packaging instruction, net/gross weight and any destination/carrier requirements.

Warranty and supply

Confirm warranted energy/cycles or years, throughput/DoD/temperature limits, exclusions, service route, serial traceability, production date, quantity, lead time and substitutions.

Battery-system boundaries

51.2 V and a listed inverter brand do not prove a supported battery pair

Voltage, current, protocol, firmware, wiring and written approval must align simultaneously.

5.12 kWh is nominal

Do not quote 5.12 kWh as usable AC energy or runtime. Apply reserve, allowable DoD, conversion loss, power limit, temperature and aging.

A brand list is not a model approval

Growatt, Solis, GoodWe, Sol-Ark, SRNE and Deye are listed, but compatibility must be verified for the exact inverter model, protocol and firmware.

15-year wording is not a warranty

A design-lifespan label does not define warranty years, retained capacity, throughput, cycle allowance, exclusions or remedy. Request the current warranty document.

CE/EMC/UN38.3 labels require files

Confirm certificate or report number, model coverage, applicant/manufacturer, edition and validity; obtain the exact-model UN38.3 test summary and SDS for shipment.

Continue the GLR-100 review

Verify inverter pairing and lithium transport evidence

These guides separate electrical compatibility from export-document readiness.

Battery–inverter compatibility checks

Verify voltage, current, protocol, firmware, approved lists, protection and warranty for the exact pairing.

Review pairing checks →

Lithium battery export checklist

Request the model-specific UN38.3 test summary, SDS, classification, packing, labels and traceability.

Review transport files →

GLR-100 battery FAQ

Questions to close before integrating the 51.2 V battery

The current manual, protocol and warranty remain decisive.

Is 5.12 kWh fully usable?

No. It is nominal energy. Confirm allowed DoD and reserve, BMS cutoff, conversion losses, temperature, power level, aging and warranty rules before quoting usable energy or runtime.

Does the source brand list guarantee inverter compatibility?

No. Confirm the exact inverter model/suffix, firmware, voltage/current limits, CAN/RS485 protocol, cable/pinout and written approval for GLR-100.

How many GLR-100 batteries can be paralleled?

The current record does not provide a verified maximum. Request the manual and confirm quantity, addressing, busbars/cables, protection, commissioning and warranty conditions.

Are CE, EMC and UN38.3 labels enough for shipment?

No. Obtain the actual model-covered certificate/report and the GLR-100 UN38.3 test summary, SDS, classification, packing and labeling evidence required by the carrier and destination.

Prepare a model-specific GLR-100 battery RFQ

Send the inverter model/firmware, load and autonomy duty, parallel quantity, mounting method, destination and required certificate, transport and warranty files.

Start with the product, application or project information you have. We can help identify the remaining configuration, document or delivery questions before a final quotation.

Verify GLR-100 Pairing